在南丫島保護流浪貓團體見到一隻單耳貓貓, 依然很可愛, 希望好快有人收養佢
|
||||
|
[Show as slideshow] Pls see this vminfo.nl-guide-create-an-esx-4i-usb-boot-key.pdf Reference from http://www.vminfo.nl/?p=267 See this vminfonl-guide-create-an-esx-3i-usb-boot-key In short : First get the following tools: 7-Zip(Free), WinImage(Demo) Download the ESXi ISO Open the ISO with 7-Zip Extract “install.tgz” Open “install.tgz” with 7-Zip Click on “install.tar” Browse to “usr\lib\vmware\installer\” Open “VMware-VMvisor-big-3.5.0_Update_2-103909.i386.dd.bz2″ Extract “VMware-VMvisor-big-3.5.0_Update_2-103909.i386.dd” Open WinImage and go to Disk, click on “Restore Virtual Harddisk Image on physical drive” Select a […] To run dot1q vlan on the vmware guest under vmware server, you cannot do this with one NIC, you need at least two NICs. Host OS: eth0 -> /dev/vmnet0 (for host OS’s management, uplink is vlan trunk) eth1 -> /dev/vmnet3 (for used by guest OS, uplink is vlan trunk) eth0.4 -> /dev/vmnet4 (for HOST management […] Virtual Switch Tagging (VST) VST uses 802.1q VLAN trunks and tagged traffic, as we’ve discussed already. The physical switch treats the ESX Server like any other switch, tagging traffic with the appropriate VLAN tags as it moves across the trunk into the ESX Server’s NICs. The ESX Server then uses the VLAN tags to direct […] http://mediadesigner.digitalmedianet.com/articles/viewarticle.jsp?id=27784 Moreover, I have found that Canon DPP’s raw to jpeg conversion is a bit worst than photoshop CS’s ACR OK, just rushed back home to try this hack on my Canon 400D. Bingo, it works both on my 2GB and 4GB CF Card!! Just posted the ISO 1600 and ISO3200 for comparison here. ↑F5.0, 1/30 ISO16OO ↑F5.0, 1/60 ISO3200 ↑ISO3200 after denoise The noise level of ISO3200 is acceptable. Furthermore, I can also […] HOWTO: 1. use a fully charged battery. you need CF card reader and windows. on a mac, use windows under bootcamp/vmware fusion. 2. update to latest firmware (1.1.1) by downloading the latest firmware, copying it into the root of CF, and running “update firmware” in the setup menu. 3. empty your CF, download testfir.fir from […] http://www.teamviewer.com/download/index.aspx Great to setup temporarily remote desktop like connection between two machines. Support Windows & Mac and it require minimal setup. |
|
|||
